SPECIFICATIONS
Body Material: ABS
Brand Name: CEMODI
Choice: yes
Hign-concerned Chemical: None
Installation Method: self-contained
Is Bulbs Included: Yes
Is Dimmable: No
Item Type: Wall Lamps
Light Source: LED
Luminous Flux: <60
Origin: Mainland China
Power Source: DRY BATTERY
Protection Level: IP65
Style: Modern Style
Usage: Home Lighting
semi_Choice: yes
✅ Diamond Aesthetic Design
PG33 crystal - clear lampshade + diamond - shaped reflector. At night, it projects diamond - shaped light spots, enhancing the artistic sense of the courtyard.
✅ Military - Grade Waterproof
IP65 sealed structure + ABS high - gloss black anti - UV shell. It can operate stably in extreme weather conditions from - 20℃ to 60℃.
✅ Intelligent Dual - Mode Operation
☀️ Light - controlled mode: Automatically lights up in low - light conditions (7LM soft illumination).
✅ Zero - Wiring Installation
Equipped with a dual - fixing solution of expansion screws + 3M adhesive. One person can complete the installation in 10 minutes.
✅ True Battery Life Promise
400mAh nickel - chromium battery (actual capacity marked). 5 - hour sunlight charging = 12 - hour all - night illumination.
2. Technical Parameter Visualization Table
Component |
Specification Details |
LED Light Source |
2×0.5W 32835 SMD LEDs (3000K warm white light color temperature, 7 lumens per single lamp, 14 lumens when two lamps are superimposed) |
Solar Panel |
Amorphous silicon 4 - cell matrix panel (51.4×66.3×4mm), 0.27W output, can still charge in cloudy days |
Battery System |
1.2V 400mAh nickel - chromium battery (2000 - cycle charging), with built - in over - charge/over - discharge protection chip |
Main Body Material |
High - density ABS (impact resistance level IK07) + PG33 optical - grade light - transmitting cover (light transmittance ≥ 92%) |
Environmental Adaptability |
IP65 waterproof and dustproof. Operating temperature: - 20℃~60℃. Resistant to level 5 wind force |
3. Scenario - based Pain Point Solutions
🏡 Courtyard Security Guard
▶ PIR motion sensor mode: Automatically increases brightness late at night to scare away suspicious intruders.
▶ Anti - glare design: 7LM soft light is not dazzling, friendly to areas where pets and children are active.
🌧️ Coping with Severe Weather
▶ Amorphous silicon solar panel: Can still charge in haze/rainy and snowy days, with a battery life 2 hours longer than conventional ones.
▶ Rust - proof screw components: Do not rust during long - term use in saline - alkaline areas/seaside villas.
💡 Energy - Saving Comparison Data
Compared with traditional 20W halogen wall lights:
☑ Annual electricity cost savings of about $38.
☑ Reduces 136kg of carbon emissions.
☑ Zero maintenance cost.
4. Installation Instructions with Visualization
Step 1: Tear off the insulating sheet to activate the battery.
Step 2: Select a location (with at least 4 hours of daily sunlight).
Step 3: Fix with screws or paste with 3M adhesive (load - bearing capacity ≤ 1.2kg).
Step 4: Select the mode switch slider (constant on/sensor).
⚠️ Precautions:
New batteries need to be charged continuously for 24 hours to activate the maximum capacity.
It is recommended to clean the snow on the solar panel monthly in winter.
